HP Procurve 3500 Series 10/100 24/48ports, 10/100/1000 24/48ports PoE/PWR Managed Layer 3

Price:

USD$2,924.8125

Brand:

HP Procurve

Product Description

Management

Remote Intelligent Mirroring: mirrors selected ingress/egress traffic based on ACL, port, MAC address, or VLAN to a local or remote 8200zl/6600/6200yl/5400zl/3500 switch anywhere on the network
RMON, XRMON, and sFlow v5: provide advanced monitoring and reporting capabilities for statistics, history, alarms, and events
IEEE 802.1AB Link Layer Discovery Protocol (LLDP): automated device discovery protocol for easy mapping by network management applications
Uni-Directional Link Detection (UDLD): monitors cable between two switches and shuts down the ports on both ends if the cable is broken turning the bi-directional link into uni-directional; this prevents network problems such as loops
Management simplicity: ProCurve-common networking features and CLI implementation (common across ProCurve 8200zl/6600/6200yl/5400zl/3500 switches)
Command authorization: leverages RADIUS to link a custom list of CLI commands to individual network administrator's login; also provides an audit trail
Friendly port names: allow assignment of descriptive names to ports
Dual flash images: provides independent primary and secondary OS files for backup while upgrading
Multiple configuration files: multiple configuration files can be stored to the flash image

Connectivity

IPv6: New!
- IPv6 host: the switches can be managed and deployed at the edge of IPv6 networks
- Dual stack (IPv4/IPv6): provides transition mechanism from IPv4 to IPv6; supports connectivity for both protocols
- MLD snooping: forwards IPv6 multicast traffic to the appropriate interface; prevents IPv6 multicast traffic from flooding the network
- IPv6 ACL/QoS: supports ACL and QoS for IPv6 network traffic
- IPv6 ready: the switch hardware can support IPv6 routing, tunneling, and security; these features will be available when enabled via software update in follow-on releases
IEEE 802.3af Power over Ethernet: provides up to 15.4 W per port to IEEE 802.3af-compliant PoE powered devices such as IP phones, wireless access points, and security cameras
Pre-standard PoE support: detects and provides power to pre-standard PoE devices; see list of supported devices in the product FAQ at www.procurve.com
Jumbo frames: on Gigabit and 10-Gb ports, allow high-performance remote backup and disaster-recovery services
Auto-MDIX: automatically adjusts for straight-through or crossover cables on all 10/100 and 10/100/1000 ports

Performance

High-speed/capacity architecture: up to 153.6 Gbps crossbar switching fabric provides intra- and inter- module switching with up to 111.5 million pps throughput on the purpose-built ProVision ASICs
Selectable queue configurations: increase performance by selecting the number of queues and associated memory buffering that best meet the requirements of your network applications

Resiliency and high availability

Virtual Router Redundancy Protocol (requires Premium License): VRRP allows groups of two routers to dynamically back each other up to create highly available routed environments
IEEE 802.1s Multiple Spanning Tree Protocol: provides high link availability in multiple VLAN environments by allowing multiple spanning trees; encompasses IEEE 802.1D Spanning Tree Protocol and IEEE 802.1w Rapid Spanning Tree Protocol
Server-to-switch distributed trunking: allows a server to connect to two switches with one logical trunk that consists of multiple physical connections; enables load-balancing and increases resiliency New!
IEEE 802.3ad Link Aggregation Control Protocol (LACP) and ProCurve trunking: support up to 60 trunks, each with up to 8 links (ports) per trunk

Layer 2 switching

IEEE 802.1ad Q-in-Q (requires Premium License): increases the scalability of Ethernet network by providing a hierarchical structure; connects multiple LANs on high-speed campus or metro network
ProCurve switch meshing: dynamically load-balances across multiple active redundant links to increase available aggregate bandwidth
VLAN support and tagging: supports the IEEE 802.1Q standard and 2,048 VLANs simultaneously
IEEE 802.1v protocol VLANs: isolate select non-IPv4 protocols automatically into their own VLANs
GARP VLAN Registration Protocol: allows automatic learning and dynamic assignment of VLANs

Layer 3 services

UDP helper function: UDP broadcasts can be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevent server spoofing for UDP services such as DHCP
Loopback interface address: defines an address in RIP and OSPF that can always be reachable, improving diagnostic capability

Layer 3 routing

Static IP routing: provides manually configured routing; includes ECMP capability
RIP: provides RIPv1 and RIPv2 routing
OSPF (requires Premium License): includes host-based ECMP to provide link redundancy/scalable bandwidth and NSSA

Security

Access control lists (ACLs): provide filtering based on the IP field, source/destination IP address/subnet, and source/destination TCP/UDP port number on a per-VLAN or per-port basis
Multiple user authentication methods:
- IEEE 802.1X users per port: provides authentication of multiple IEEE 802.1X users per port; prevents user “piggybacking” on another user’s IEEE 802.1X authentication
- Web-based authentication: authenticates from Web browser for clients that do not support IEEE 802.1X supplicant; customized remediation can be processed on an external Web server
- MAC-based authentication: client is authenticated with the RADIUS server based on client's MAC address
- Concurrent IEEE 802.1X, Web, and MAC authentication schemes per port: switch port will accept up to 32 sessions of IEEE 802.1X, Web, and MAC authentications
Virus throttling: detects traffic patterns typical of WORM-type viruses and either throttles or entirely prevents the ability of the virus to spread across the routed VLANs or bridged interfaces, without requiring external appliances
DHCP protection: blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks
Secure management access: all access methods--CLI, GUI, or MIB--are securely encrypted through SSHv2, SSL, and/or SNMPv3
USB Secure Autorun (requires HP ProCurve Manager Plus): deploys, diagnoses, and updates switch using USB flash drive; works with secure credential to prevent tampering
Switch CPU protection: provides automatic protection against malicious network traffic trying to shut down the switch
ICMP throttling: defeats ICMP denial-of-service attacks by enabling any switch port to automatically throttle ICMP traffic
Identity-driven ACL: enables implementation of a highly granular and flexible access security policy and VLAN assignment specific to each authenticated network user
STP BPDU port protection: blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks
Dynamic IP lockdown: works with DHCP protection to block traffic from unauthorized hosts, preventing IP source address spoofing
Dynamic ARP protection: blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data
STP Root Guard: protects root bridge from malicious attack or configuration mistakes
Detection of malicious attacks: monitors 10 types of network traffic and sends a warning when an anomaly that potentially can be caused by malicious attacks is detected
Port security: allows access only to specified MAC addresses, which can be learned or specified by the administrator
MAC address lockout: prevents configured particular MAC addresses from connecting to the network
Source-port filtering: allows only specified ports to communicate with each other
RADIUS/TACACS+: eases switch management security administration by using a password authentication server
Secure Shell (SSHv2): encrypts all transmitted data for secure, remote command-line interface (CLI) access over IP networks
Secure Sockets Layer (SSL): encrypts all HTTP traffic, allowing secure access to the browser-based management GUI in the switch
Secure FTP: allows secure file transfer to/from the switch; protects against unwanted file downloads or unauthorized copying of switch configuration file
Management Interface Wizard: CLI-based step-by-step configuration tool to help ensure that management interfaces such as SNMP, telnet, SSH, SSL, Web, and USB are secured to desired level New!
Switch management logon security: can require either RADIUS or TACACS+ authentication for secure switch CLI logon
Security banner: displays a customized security policy when users log in to the switch

Convergence

IP multicast routing (requires Premium License): includes PIM Sparse and Dense modes to route IP multicast traffic
IP multicast snooping (data-driven IGMP): automatically prevents flooding of IP multicast traffic
LLDP-MED (Media Endpoint Discovery): a standard extension of LLDP that stores values for parameters such as QoS and VLAN to automatically configure network devices such as IP phones
RADIUS VLAN for voice: uses standard RADIUS attribute and LLDP-MED to automatically configure VLAN for IP phones
PoE allocations: supports multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user specified) to allocate PoE power for more efficient energy savings

Quality of Service (QoS)

Advanced classifier-based QoS: classifies traffic using multiple match criteria based on L2/3/4 information; applies QoS policies such as setting priority level and rate limit to selected traffic per port or per VLAN New!
Layer 4 prioritization: enables prioritization based on TCP/UDP port numbers
Traffic prioritization: allows real-time traffic classification into eight priority levels mapped to eight queues
Bandwidth shaping:
- Port-based rate limiting: per-port ingress/egress enforced maximum bandwidth
- Classifier-based rate limiting: uses ACL to enforce maximum bandwidth for ingress traffic on each port
- Guaranteed minimum: per-port, per-queue egress-based guaranteed minimum bandwidth
Class of Service (CoS): sets the IEEE 802.1p priority tag based on IP address, IP Type of Service (ToS), L3 protocol, TCP/UDP port number, source port, and DiffServ

Model specifications

	HP ProCurve Switch 3500yl-24G-PWR Intelligent Edge (J8692A)	HP ProCurve Switch 3500yl-48G-PWR Intelligent Edge (J8693A)	HP ProCurve 3500-24 Switch (J9470A)
Ports
	1 open module slot 20 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T) Media Type: Auto-MDIX Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only 1 RS-232C DB-9 console port 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or an open mini-GBIC slot (for use with mini-GBIC transceivers) Supports a maximum of 4 10-GbE ports	1 open module slot 44 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T) Media Type: Auto-MDIX Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only 1 RS-232C DB-9 console port 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or an open mini-GBIC slot (for use with mini-GBIC transceivers) Supports a maximum of 4 10-GbE ports	20 RJ-45 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX) Media Type: Auto-MDIX Duplex: half or full 4 dual-personality ports Each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers) 1 RS-232C DB-9 console port
Physical characteristics
Dimensions	15.43(d) x 17.44(w) x 1.73(h) in. (39.2 x 44.3 x 4.4 cm) (1U height)	16.93(d) x 17.44(w) x 1.73(h) in. (43.0 x 44.3 x 4.4 cm) (1U height)	15.43(d) x 17.44(w) x 1.73(h) in. (39.2 x 44.3 x 4.4 cm) (1U height)
Weight	14.11 lb. (6.4 kg)	16.09 lb. (7.3 kg)	11.9 lb. (5.4 kg)
Memory and processor
10G Module	ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM	ARM9 @ 200 MHz; packet buffer size: 36 Mb QDR SDRAM
Management Module	Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM	Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash Mb, 128 MB compact flash, 256 MB DDR SDRAM	Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM
Mounting
	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Performance
100 Mb Latency			< 3.4 µs (LIFO 64-byte packets)
1000 Mb Latency	< 3.4 µs (FIFO 64-byte packets)	< 3.4 µs (FIFO 64-byte packets)	< 2.9 µs (LIFO 64-byte packets)
10 Gbps Latency	< 2.1 µs (FIFO 64-byte packets)	< 2.1 µs (FIFO 64-byte packets)
Throughput	up to 75.7 million pps	up to 111.5 million pps	up to 8.9 million pps (64-byte packets)
Routing/Switching capacity	101.8 Gbps	149.8 Gbps	12 Gbps
Switch fabric speed	105.6 Gbps	153.6 Gbps
Routing table size	10,000 entries	10,000 entries	10,000 entries
MAC address table size	64,000 entries	64,000 entries	64,000 entries
Environment
Operating temperature	32ºF to 131ºF (0ºC to 55ºC); 32°F to 104°F (40°C) when used with any X2 10-GbE	32ºF to 131ºF (0ºC to 55ºC); 32°F to 104°F (40°C) when used with any X2 10-GbE	32ºF to 131ºF (0ºC to 55ºC)
Operating relative humidity	15% to 95% @ 104ºF (40ºC), non-condensing	15% to 95% @ 104ºF (40ºC), non-condensing	15% to 95% @ 104ºF (40ºC), non-condensing
Non-operating/Storage temperature	-40ºF to 158ºF (-40ºC to 70ºC)	-40ºF to 158ºF (-40ºC to 70ºC)	-40ºF to 158ºF (-40ºC to 70ºC)
Non-operating/Storage relative humidity	15% to 90% @ 149ºF (65ºC), non-condensing	15% to 95% @ 149ºF (65ºC), non-condensing	15% to 90% @ 149ºF (65ºC), non-condensing
Altitude	up to 15,000 ft. (4.6 km)	up to 15,000 ft. (4.6 km)	up to 15,000 ft. (4.6 km)
Acoustic	Power: 55.1 dB, Pressure: 44.8 dB ISO 7779, ISO 9296	Power: 55.6 dB, Pressure: 45.3 dB ISO 7779, ISO 9296	Power: 53.1 dB, Pressure: 42.6 dB ISO 7779, ISO 9296
Electrical characteristics
		Achieved Miercom Certified Green Award
Description	The switch automatically adjusts to any voltage between 100-127 and 200-240 volts and either 50 or 60 Hz	The switch automatically adjusts to any voltage between 100-127 and 200-240 volts with either 50 or 60 Hz	The switch automatically adjusts to any voltage between 100-127 and 200-240 volts and either 50 or 60 Hz
Maximum heat dissipation	865 BTU/hr (912.9 kJ/hr)	1144 BTU/hr (1206.9 kJ/hr)	268 BTU/hr (282.8 kJ/hr)
Voltage	100-127 / 200-240 VAC	100-127 / 200-240 VAC	100-127 / 200-240 VAC
Current	10.0 / 5.0 A	10.0 / 5.0 A	1.1 / 0.6 A
Idle power	98 W	142 W	68.2 W
Maximum power rating	623 W	705 W	78.7 W
PoE power	398 W	398 W
Frequency	50 / 60 Hz	50 / 60 Hz	50 / 60 Hz
Notes	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE Power is the power supplied by the internal power supply, it is dependent on the type and quantity of power supplies and may be supplemented with the use of a External Power Supply (EPS).	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE Power is the power supplied by the internal power supply, it is dependent on the type and quantity of power supplies and may be supplemented with the use of a External Power Supply (EPS).	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.
Safety
	CSA 22.2 No. 60950 UL 60950 IEC 60950 EN 60950	CSA 22.2 No. 60950 UL 60950 IEC 60950 EN 60950	CSA 22.2 No. 60950 UL 60950 IEC 60950 EN 60950
Notes
	When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.	When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.	When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.

	HP ProCurve 3500-24-PoE Switch (J9471A)	HP ProCurve 3500-48 Switch (J9472A)	HP ProCurve 3500-48-PoE Switch (J9473A)
Ports
	20 RJ-45 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX) Media Type: Auto-MDIX Duplex: half or full 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or an open mini-GBIC slot (for use with mini-GBIC transceivers) 1 RS-232C DB-9 console port	44 RJ-45 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX) Media Type: Auto-MDIX Duplex: half or full 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or an open mini-GBIC slot (for use with mini-GBIC transceivers) 1 RS-232C DB-9 console port	44 RJ-45 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX) Media Type: Auto-MDIX Duplex: half or full 4 dual-personality ports each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) with PoE or an open mini-GBIC slot (for use with mini-GBIC transceivers) 1 RS-232C DB-9 console port
Physical characteristics
Dimensions	15.43(d) x 17.44(w) x 1.73(h) in. (39.2 x 44.3 x 4.4 cm) (1U height)	16.93(d) x 17.44(w) x 1.73(h) in. (43.0 x 44.3 x 4.4 cm) (1U height)	16.93(d) x 17.44(w) x 1.73(h) in. (43.0 x 44.3 x 4.4 cm) (1U height)
Weight	13.23 lb. (6 kg)	13.45 lb. (6.1 kg)	14.99 lb. (6.8 kg)
Memory and processor
Management Module	Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash, 128 MB compact flash, 256 MB DDR SDRAM	Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash Mb, 128 MB compact flash, 256 MB DDR SDRAM	Stackable memory and processor: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash Mb, 128 MB compact flash, 256 MB DDR SDRAM
Mounting
	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only	Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
Performance
100 Mb Latency	< 3.4 µs (LIFO 64-byte packets)	< 3.4 µs (LIFO 64-byte packets)	< 3.4 µs (LIFO 64-byte packets)
1000 Mb Latency	< 2.9 µs (LIFO 64-byte packets)	< 2.9 µs (LIFO 64-byte packets)	< 2.9 µs (LIFO 64-byte packets)
Throughput	up to 8.9 million pps (64-byte packets)	up to 12.5 million pps (64-byte packets)	up to 12.5 million pps (64-byte packets)
Routing/Switching capacity	12 Gbps	16.8 Gbps	16.8 Gbps
Routing table size	10,000 entries	10,000 entries	10,000 entries
MAC address table size	64,000 entries	64,000 entries	64,000 entries
Environment
Operating temperature	32ºF to 131ºF (0ºC to 55ºC)	32ºF to 131ºF (0ºC to 55ºC)	32ºF to 131ºF (0ºC to 55ºC)
Operating relative humidity	15% to 95% @ 104ºF (40ºC), non-condensing	15% to 95% @ 104ºF (40ºC), non-condensing	15% to 95% @ 104ºF (40ºC), non-condensing
Non-operating/Storage temperature	-40ºF to 158ºF (-40ºC to 70ºC)	-40ºF to 158ºF (-40ºC to 70ºC)	-40ºF to 158ºF (-40ºC to 70ºC)
Non-operating/Storage relative humidity	15% to 90% @ 149ºF (65ºC), non-condensing	15% to 95% @ 149ºF (65ºC), non-condensing	15% to 95% @ 149ºF (65ºC), non-condensing
Altitude	up to 15,000 ft. (4.6 km)	up to 15,000 ft. (4.6 km)	up to 15,000 ft. (4.6 km)
Acoustic	Power: 55.1 dB, Pressure: 44.8 dB ISO 7779, ISO 9296	Power: 55.8 dB, Pressure: 43.5 dB ISO 7779, ISO 9296	Power: 55.6 dB, Pressure: 45.3 dB ISO 7779, ISO 9296
Electrical characteristics
Description	The switch automatically adjusts to any voltage between 100-127 and 200-240 volts and either 50 or 60 Hz	The switch automatically adjusts to any voltage between 100-127 and 200-240 volts with either 50 or 60 Hz	The switch automatically adjusts to any voltage between 100-127 and 200-240 volts with either 50 or 60 Hz
Maximum heat dissipation	435 BTU/hr (458.92 kJ/hr)	465 BTU/hr (490.58 kJ/hr)	611 BTU/hr (644.6 kJ/hr)
Voltage	100-127 / 200-240 VAC	100-127 / 200-240 VAC	100-127 / 200-240 VAC
Current	6.6 / 3.0 A	1.6 / 0.8 A	7.3 / 3.3 A
Idle power	91 W	96 W	133.2 W
Maximum power rating	497 W	136.2 W	548.8 W
PoE power	398 W		398 W
Frequency	50 / 60 Hz	50 / 60 Hz	50 / 60 Hz
Notes	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE Power is the power supplied by the internal power supply, it is dependent on the type and quantity of power supplies and may be supplemented with the use of a External Power Supply (EPS).	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.	Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE Power is the power supplied by the internal power supply, it is dependent on the type and quantity of power supplies and may be supplemented with the use of a External Power Supply (EPS).
Safety
	EN 60950/IEC 60950 CAN/CSA 22.2 No. 60950 EN 60825 UL 60950	EN 60950/IEC 60950 CAN/CSA 22.2 No. 60950 UL 60950 IEC 60950	EN 60950/IEC 60950 CAN/CSA 22.2 No. 60950 UL 60950 IEC 60950
Notes
	When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.	When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.	When using mini-GBICs with this product, mini-GBICs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required.

Warranty Information

* ProCurve Lifetime Warranty: for as long as you own the product, with next-business-day advance replacement (available in most countries).

* Electronic and telephone support: limited electronic and telephone support is available from HP. Refer to the HP Web site at www.procurve.com/support for details on the support provided and the period during which support is available.

* Software releases: refer to the HP Web site at www.procurve.com/support for details on the software releases provided and the period during which software releases are available.

Find Similar Products by Category

HP Procurve

New Products

Our Newsletter