| HP ProCurve Switch 2510-24 (J9019B) | HP ProCurve Switch 2510-48 (J9020A) |
| Ports |
|
24 RJ-45 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX)
Media Type: Auto-MDIX
Duplex: half or full
2 dual-personality ports
each port can be used as either an RJ-45 10/100/1000 port (IEEE 802.3 Type 10Base-T; IEEE 802.3u Type 100Base-TX; IEEE 802.3ab 1000Base-T Gigabit Ethernet) or an open mini-GBIC slot (for use with mini-GBIC transceivers)
1 RJ-45 serial console port
|
48 RJ-45 auto-sensing 10/100 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX)
Media Type: Auto-MDIX
Duplex: half or full
2 RJ-45 auto-sensing 10/100/1000 ports (IEEE 802.3 Type 10Base-T, IEEE 802.3u Type 100Base-TX, IEEE 802.3ab Type 1000Base-T)
Media Type: Auto-MDIX
Duplex: 10Base-T/100Base-TX: half or full; 1000Base-T: full only
2 open mini-GBIC (SFP) slots
1 RJ-45 serial console port
|
| Physical characteristics |
| Dimensions |
9.3(d) x 17.42(w) x 1.73(h) in. (23.62 x 44.25 x 4.39 cm) (1U height) |
9.3(d) x 17.42(w) x 1.73(h) in. (23.62 x 44.25 x 4.39 cm) (1U height) |
| Weight |
4.89 lb. (2.22 kg), Fully loaded |
6.05 lb. (2.74 kg), Fully loaded |
| Memory and processor |
| Processor |
MIPS 32 @ 264 MHz, 8 MB flash, 64 MB SDRAM; packet buffer size: 384 KB |
MIPS 32 @ 300 MHz, 16 MB flash, 128 MB SDRAM; packet buffer size: 512 KB |
| Mounting |
|
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
|
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included); horizontal surface mounting only
|
| Performance |
| Latency |
|
|
| 100 Mb Latency |
< 4.9 µs (64-byte packets) |
< 4.9 µs (64-byte packets) |
| 1000 Mb Latency |
< 2.6 µs (64-byte packets) |
< 2.9 µs (64-byte packets) |
| Throughput |
up to 6.5 million pps (64-byte packets) |
up to 13 million pps (64-byte packets) |
| Switching capacity |
8.8 Gbps |
17.6 Gbps |
| MAC address table size |
8,000 entries |
8,000 entries |
| Environment |
| Operating temperature |
32ºF to 113ºF (0ºC to 45ºC) |
32ºF to 113ºF (0ºC to 45ºC) |
| Operating relative humidity |
15% to 95% @ 104ºF (40ºC), non-condensing |
15% to 95% @ 104ºF (40ºC), non-condensing |
| Non-operating/Storage temperature |
-40ºF to 158ºF (-40ºC to 70ºC) |
-40ºF to 158ºF (-40ºC to 70ºC) |
| Non-operating/Storage relative humidity |
15% to 95% @ 149ºF (65ºC), non-condensing |
15% to 90% @ 149ºF (65ºC), non-condensing |
| Altitude |
up to 10,000 ft. (3 km) |
up to 15,000 ft. (4.6 km) |
| Acoustic |
Power: 0 dB no fan |
Power: 43.6 dB; DIN 45635T.19 per ISO 7779 |
| Electrical characteristics |
| Maximum heat dissipation |
68 BTU/hr (71.74 kJ/hr) |
92 BTU/hr (97 kJ/hr) |
| Voltage |
100-127 / 200-240 VAC |
100-127 / 200-240 VAC |
| Current |
0.7 / 0.4 A |
1.2 / 0.7 A |
| Maximum power rating |
20 W |
27 W |
| Power output |
|
|
| Frequency |
50 / 60 Hz |
50 / 60 Hz |
| Notes |
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. |
Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. |
| Safety |
|
cUL (CSA 22.2 No. 60950) UL 60950-1 IEC 60950 EN 60950
|
cUL (CSA 22.2 No. 60950) UL 60950-1 IEC 60950 EN 60950
|
| Notes |
|
|
|